Tips for Setting Up LED Cabinet Lights at Home

With adoption of LEDs increasing, individuals now have numerous opportunities to install sustainable and energy efficient LED cabinet lights at home. Previously, incandescent and fluorescent fixtures were used to light up cabinets. However, due to the complex and bulky nature of the luminaries, the units were not suitable for tight spaces.

LED Strip Lights

LED strip lights are recommended for illuminating the interior of cabinets. During installation, the units are setup at the top of the space, pointing downwards. If the strip light is equipped with a frosted lens or a soft cover, it can serve as background lighting for cabinets. For such configurations, the slim-profile light is installed at the back wall of the space.

Seamless cabinet lighting systems incorporate a small switch that activates the lights, when the door is opened. LEDs are ideal for this type of assembly because the units can be toggled on/off quickly. Including a micro-switch with LED cabinet strip lights may also be applied to large drawers, such as deep storage bins.

LED Puck Lights

LED puck lights are applicable to the underside of shelves and the exterior sections of cabinets. For a space-saving setup, the units can be recessed into the surface. Another conventional method includes mounting LED puck lights at the corner of the underside section of the cabinet. This option is a viable alternative to downward installations, which allow the lights to be pointed at an angle.

When equipped with reflectors, LED puck lights can serve as overhead lamps. A cone-shaped cover, which doubles as a reflector, is applied to the unit to ensure proper beam placement over the space.

In the kitchen, for LED puck lights used over parts of the space where cooking is frequently conducted (prepping and heating), it is advisable to look for waterproof or rugged LED lights.

For other commercial and residential lighting fixtures please visit Larson Electronics.

Ambient vs Task Lighting for LED Lamps

Inside homes, lighting systems are setup based on the type of room and activities being conducted in the space. Such considerations ensure proper lamps are used and installed in the right parts of the area. Ambient lighting and task lighting are two main types of LED fixtures that are designed to support specific spaces and activities. Below compares the two lighting systems and provides recommendations during setup.

Ambient Lighting for General Spaces

Ambient lighting is ideal for wide, open spaces and rooms where general activities are carried out. Examples of rooms that benefit from ambient illumination include living rooms, kitchens, dining rooms and bathrooms.

Bright illumination is required, so that the entire space can be used. LED floodlights, as well as diffused LEDs are applicable to such luminaries. To prevent glare, Indirect lighting can be applied. It is best practice to avoid targeting a specific section of the room; and all sections should be illuminated consistently.

A wide range of mounting solutions are suitable for ambient lighting systems. Ceiling mounted and recessed LED fixtures are the most common inside homes. Track lights, wall scones and floor lamps may also be utilized for even illumination.

Task Lighting

Task lighting is applicable to illumination for specific tasks or activities. Examples of task lighting systems include cabinet lights, LED strip lights for hallways, LED table lamps, pivot lights and etc.

LED spotlights, due to its tight and powerful beam characteristics, are frequently used for task lighting systems around homes. Some rooms, especially large, general spaces, may incorporate both task and ambient illumination. This practice is suitable for creating multiple activity areas inside the room. For instance, a living room may include ceiling mounted fixtures for general illumination, while a table in the room could be equipped with an LED table lamp for task lighting.

5 Practical Uses for LED Spotlights

LED lights are a popular choice for many people who want to make a switch for a longer lasting and more efficient type of lighting bulbs. If you’re aware of the limitations and other applications that you can use LED lights for, then you should have no problem making the switch. There are many different ways that they can be used, and sometimes they work much better than other methods. Making the switch makes sense for practicality reasons, and they can help in particular spaces in your home. Take a look at some of our reasons for why you should make the switch to LED spotlights and why they are a better choice for you than regular bulb lighting.

Outdoor Use

One of the most common uses of LED spotlights is by placing them around your home. You can buy specifically branded LED spotlights that are designed for outdoor uses. You can use them to decorate a garden pathway, entryway, or to help illuminate your patio or deck. The most effective type of LED spotlight are the ones that are strings of light, and this makes matching sets work together beautifully and add much more light to the path for you and your guest’s enjoyment. You can find these at any home decor store, and in most cases, you’ll find that they’re cost-efficient and only cost less than USD 50 per set.

Eco-friendly Lights

If you want to make a bigger effort to switch your home to be more eco-friendly, LED spotlights are one way to do so. LED spotlights are one lighting option that can help lower your electric bills and provide you with more cost-efficient lighting. This makes them a great choice for anyone who is trying to reduce their carbon footprint, while still maintaining a well-lit room. These lights are low-wattage and are usually made from environmentally friendly materials. Check the brand to double check and make sure that they are. They hardly cost anything and will cost less than other forms of modern lighting. Check here.

Accent Lighting

Although most people will think of under-cabinet lighting when they hear about accent lighting, there are many other applications when it comes to using LED spotlight sin accent lightings within the home. One of the many locations in your home that can benefit from lighting is under the bookshelves that way you can show off whatever it is you want to store on the shelves. Similarly, you can use LED spotlights to put a focus on an art piece of your room; this often will draw extra attention to an art piece such as a painting or sculpture that you have put up.

Conclusion

As you can see, LED spotlights can be a great way to help provide your home with a new lighting source. Not only are they cost effective, but they are energy efficient, meaning you won’t be increasing your carbon foot, and you’ll be doing the world a favor by switching to a lower cost energy source. You can afford to purchase several of these packages for a lower price than traditional lighting methods. However, if you’re looking to buy fancier models of LED spotlights, you may be looking into spending more money. Learn more details at: https://www.larsonelectronics.com/ledlights.aspx

LEDs vs Incandescent Lighting Maintenance

LEDs and incandescent lighting are often compared against each other, as LEDs are designed to supersede traditional lighting technologies, including halogen lamps. For homeowners, maintenance is a key factor to take into consideration during purchase and usage.

Below takes a closer look at how the two lighting options differ, when it comes to maintaining lighting systems over long-term use.

Lifespan and Shock Resistance

While it’s true that LEDs come with higher upfront costs, the units are less expensive to maintain over time. By comparison, incandescent bulbs must be replaced more than 20 times in order to match the 50,000-hour average lifespan of LEDs. With this in mind, individuals looking for a long-term solution to powerful lighting should use LEDs.

Depending on the location the lights are installed in may determine the type of maintenance required. In outdoor locations, garages and basements, fixtures are more prone to damage. Incandescent lights need more protective components to withstand rough contact, since the bulbs are filament based.

LED lights can survive minor bumps and shock, due to their solid-state builds. This may also be advantageous for locations with limited space, as homeowners would not need to protect the lamps with cage guards or a bulky cover.

The Last Squeeze

In some cases, the last phase of the light’s lifecycle still offers usable illumination, at a depreciated rate. This allows the individual to delay maintenance and still utilize the light, before looking for a replacement.

When incandescent lights are at their last leg, the units fail completely. The bulbs go from 100 percent illumination to zero. This makes immediate maintenance necessary to maintain illumination in the area.

LEDs have a tendency to gradually fail over time, decreasing their output levels, as the diodes slowly run out. For homeowners, this ensures a certain level of lumen retention before complete failure.

How to Clean LED Lights at Home

The accumulation of dust and debris can hinder the performance of LED lights and lamps. Such intrusive elements build up on the surface of the lens, resulting in blocked illumination. In some cases, dust can contribute to flickering and inconsistent light quality.

Because of this, it is important to keep the units clean. It is critical to note that before cleaning LED lights, they must be unplugged or disconnected.

Below are tips for maintaining residential LED lighting systems.

Indoor Lenses and LED Bulbs

Lenses and bulbs are the first components to consider cleaning. A simple dry or microfiber cloth usually does the job. Avoid scratching the lens for hard-to-remove debris. Furthermore, avoid using wet cleaning agents, as most indoor fixtures inside homes are not waterproof or approved for wet locations.

Some LED lamps, such as chandeliers, are sensitive to rough handling. For fragile fixtures, it would be possible to wrap the bulb with heavy-duty tape, to prevent breakage during removal.

Cleaning Outdoor LED Fixtures

LED lights outside of homes are more difficult to clean, due to the environment. Additionally, some lighting covers are prone to UV damage, resulting in the development of a filmy layer over the lens.

The first step is to wipe the surface with a dry cloth. Since most outdoor fixtures are sealed and/or waterproof, simply apply a dab of cleaner to remove stains or dust. In some cases, long-term UV damage is incredibly meticulous to remove. Like car headlamps, such levels of deterioration require specific cleaning agents to remove.

One of the most effective ways to improve clarity for LEDs with UV damage is the application of baking soda, liquid soap and vinegar. The solution is mildly corrosive, which breaks down thick grime on the surface without harming the fixture. Lastly, rinse the mixture off with water after cleaning.

Advantages of Wireless LED Perimeter Lights for Residential Fences

Boosting security in backyards and open residential lots starts with Perimeter Lights. Lining one’s private property with luminaries (along the boundaries) can deter theft, vandalism and accidental trespassing.

Furthermore, nocturnal animals roaming the area (in locations where such creatures are prevalent) avoid well-lit spaces, which provide peace of mind for pet owners and parents of young children.

Going Wireless

One of the major drawbacks with installing perimeter lighting is messy wires and cords. Traditionally, the larger the space, the more wiring components have to be used. Outdoor LED fixtures may also come with a step-down component that converts AC voltages to low voltage DC. To avoid managing lengthy wires, homeowners may consider using solar-powered alternatives.

For instance, solar-powered LED strobe lamps can be mounted on a pole and installed at the far corners of the perimeter (ideal for square-shaped lots). Since the units come with built-in batteries and panels, individuals do not need to run wiring through the pole and underground, connecting to a remote power source.

Types of Wireless LED Perimeter Lights

Wireless LED perimeter lights vary, depending on the needs of the space. Long and tall residential fences may incorporate solar-powered LED wall pack lights, which are commonly used on commercial buildings. Compact variants offer powerful up-lighting, with minimal light trespass (spillage).

Lining the ground of the fence can be achieved using LED strip lights. To prevent glare, individuals should consider pointing the strip lights down (from a slightly elevated position).

In some applications, homeowners will want to illuminate certain parts of the perimeter or fence. Typically, individuals keep entry and exit points well illuminated for seamless access. Some lamps may also light up signs on the wall of the fence. For such needs, LED spotlights may be deployed in the area. These units are typically installed on the ground, with the beam directed at the sign.

Best Lighting Options for Basements and Underground Spaces

Residential basements are usually dark and cold – but they don’t always have to be that way. With the right set of LED fixtures, it would be possible to turn unused, underground spaces into a place that can hold gatherings, facilitate hobbies and promote relaxation. This article uncovers tips for best lighting systems in basements.

Space-saving LED Lights

 

For basements, it is crucial to select the right type of lamp for installation. Such spaces have low ceilings and are typically wide. Because of this, it makes sense to incorporate permanent recessed LED fixtures in the room. These types of units do not take up a lot of space, since they are installed over a hole on the ceiling.

 

Recessed LED units offer intense, overhead illumination over a specific area in the basement. The lights are great for general lighting requirements. By comparison, a traditional chandelier light is not recommended for basements. The lamps can easily obstruct walkways and areas with high activities.

 

Basements are usually segregated into different parts, such as sections for lounging and another for hobbies or sleeping. To cater to various sections of the basement, standalone LED lights or overhead track lights can be applied.

 

Illuminating Entrances

 

The entrance is one of the most important parts of the basement. In most homes, basement entrances are dark and unlit, making the space feel uninviting. Furthermore, it is considered unsafe to lug tools, equipment and objects up and down a dimly lit staircase.

 

Basement entrances can be illuminated with LED strip lights, which is applicable to stairs with deep or circular steps. Short and wide staircases do not need direct illumination. Instead, lighting near the door should be sufficient to maintain safety in the area. Individuals may also opt to setup a motion detector at the entrance for automated, hands-free operation. For more information regarding led lights, please visit: http://www.larsonelectronics.com/c-140-led-lights.aspx

Setting up LED Lights in Residential Garages

These days, garages serve multiple functions inside homes. In addition to using the space to park cars, some individuals dedicate part of the area for hobbies, collections or storage. When other activities are conducted inside garages, it is important to incorporate different types of lights for clarity and comprehensive illumination. Read on to learn about various types of LED lights for residential garages.

General Illumination

Most garages come with a standard fixture that turns on when the garage door is activated. This luminary is sufficient for parking the car, but not for other tasks or activities. Hence, one of the first types of fixtures to install in a garage is overhead lighting, which could be a circular high bay LED lamp or traditional tube-style units. For rugged activities, such as woodworking, it is advisable to include a metal guard over the unit for protection.

Dimmers are highly recommended for garage lighting systems. In most cases, it is possible to benefit from natural illumination during the day by opening the garage door. As the day transitions to night, dimmers can be used to control brightness effectively. Motion sensors (not timers) are ideal for lights near entry and exit points of the garage.

LED Strip Lights

Space is typically limited in garages. Because of this, one should consider using slim, low profile fixtures. LED strip lights are suitable for parts of the garage that needs to be highlighted, possibly due to a hazard. Examples of such applications include a short flight of stairs or the side of wall leading to the doorway (for guidance).

LED cabinet lights can also be used in garages. This type of fixture is found in large storage components that houses tools or intricate items. Individuals could also install LED cabinet lights over a workstation or drafting table.

Shopping for Outdoor LED Lights on online

Online is an excellent place to look for outdoor LED spotlights lighting for several reasons. Unlike many local stores, online will have many more light options all under one roof covering. There are many choices available when purchasing outdoor LED signals, and online allows clients to discount shop and find the best offers. Since online features competitive pricing and many opportunities for free shipping, the website is a wise option for clients who would like an intensive and convenient shopping experience.

Types of LED Lamps Systems

There are many types of light systems open to consumers. Shoppers will want to choose the machine that best fits their needs.

Switch Operated

The most basic of all light systems are the ones that are handled with a turn. With this kind of exterior LED spotlights system, it is the responsibility of the property owner to remember to turn on the power whenever it is needed. The home-owner has total control of when the lights are on or off, and thus, control over the electricity being utilized.

Light Detection

This sort of system has a light diagnosis sensor that starts to turn on at dusk carefully and becomes totally illuminated at night. The machine then continues to perform until daybreak. Eventually, the light fades and changes off completely in daylight.

Motion Detection

This type of LED spotlights system only changes on when the sensor detects motion in the surrounding area. The number of the sensor can be set so that it specializes in a certain area from a few foot up to 20 toes away. The amount of time that the light is on can be changed before it changes itself off again.

Motion-sensor systems are energy conserving as they only come on when needed alternatively than being lit for hours at a time. However, it is important to note that type of system must be configured properly to avoid it from turning on spontaneously throughout the night or when a tiny animal or even a car moves by.

Purchasing the Outdoor LED Signals on online

To begin searching for outdoor LLED spotlights, go directly to the online homepage and go to All Categories tabs. Select Home & Garden. Then, surf in Backyard, Garden & Outdoor Living, and specifically in Outdoor LED spotlights Lighting. Choose what category best complies with your shopping desires, such as Light Articles or Light Fittings. Depending on your preferences, you can surf by condition, such as new or used. Because there are so many options, it pays to limit your search by price range, if known.

If you know exactly what you are looking for, you should also consider keying in the configuration you are looking for in the search container. When you are very specific, your choices are quickly narrowed down, and the website is easier to navigate. Other options include searching by theseller or specified buying types, including auction only. You may also want to limit your search to onlylooking for those vendors who offer low priced or free shipping and delivery.

Purchasing on online provides both the vendor and the buyer satisfaction when engaging in a business deal. By allowing both to rate and leave opinions for one another, other potential customers can opt to work with those whose scores will be the highest and whose reviews are exceptional.

Conclusion

When seeking to add lighting to a home, LED lightingis a smart choice. Whether getting used to discourage intruders or then add ambiance to scenery, LED spotlights to give you a variety of useful purposes. The benefits of LED lamps are numerous, especially their energy-saving features. Shoppers can choose from an assortment of lamps systems and designs to meet their needs.

With the information that was provided in this guide, potential buyers can purchase outdoor LED lamps confidently. Moreover, using online to deal shop for outdoor LED spotlights also provides consumers with an intensive and convenient buying experience.

How to Position LED Desk Lamps for Tasking Lighting at Home

Desk lamps are used often at home and offices. Furthermore, some individuals leave the luminaries on 24/7, when serving as a dim lighting option at night. Because of this, it is important to incorporate robust task lighting techniques to improve the functionality of the fixture.

Beam Angle, Light Diffuser

Desk Lamps are notorious for creating hotspots, because they are usually positioned too close to the target. Using a unit without a dimmer can also contribute to this issue. To address this, one must use a desk lamp with an arm that can be positioned overhead.

A 30-degree beam angle (maximum) is highly recommended for avoiding light spillage. Additionally, individuals should avoid directing the beam on shiny surfaces. A light diffuser can also be applied to the fixture to dampen the intensity of the luminary. This technique is suitable for lamp heads that are close to computer screens. With a light diffuser in place, visual strain is reduced when an individual briefly scans the area, as he or she looks up at the computer screen.

CRI Ratings and Lighting Technology

For clarity during illumination, it is vital to utilize a light source with CRI values above 75 (aim for 80+). Since work performed on desks is usually meticulous and detailed, a fixture with low CRI levels could make color depiction less accurate. This is very applicable to designers, artists, interior designers, architects and engineers.

LED desk lamps are great choices for task lighting. The units offer up 50,000+ hours of use and are safer touch (less heat) than filament or gas-based lamps. Small desks can benefit from LED spotlights, because the units are very compact. Fluorescent, halogen and incandescent desk lamps are suitable for tasks requiring high CRI ratings. However, the outdated lighting technologies are prone to running hot, when left on for long periods of time.